Error codes konica minolta
Description
External LCT transport section (When LU-205 or LU-303 is installed) 17-20 The tray 2 vertical transport sensor (PS12) is not turned ON even after the set period of time has elapsed after the LU paper feed sensor (PS3) turns ON by a paper. - Paper jam of a sheet of paper left at the external LCT transport section results, if the LU paper feed sensor (PS3) is turned ON when the main power switch is turned ON, a door is opened and closed, or a misfeed or malfunction is reset.
****************************************************************************** Causes
• LU transport motor (M3) • Tray 2 vertical transport motor (M7) • LU paper feed sensor (PS3) • Tray 2 vertical transport sensor (PS12) • LU drive board (LUDB) • Paper feed/transport drive board (PFTDB)
******************************************************************************
Remedy
1 Initial check items - - 2 PS3 I/O check, sensor check LUDB CN5-8 (ON) LU-205/LU-303 4-G 3 PS12 I/O check, sensor check PFTDB CN12-10 (ON) 3-P 4 M3 load check • Check code: 28 • Multi code: 21, 22, 23, 24 LUDB CN4-1 to 4 LU-205/LU-303 3-G 5 M7 load check • Check code: 28 • Multi code: 13, 14, 15, 16 PFTDB CN10-9 to 12 13-P 6 Replace LUDB. (LU-205/LU-303) - - 7 PFTDB F1 or F4 conduction check - - 8 Replace PFTDB.
کد: 20-17
شرح:
بخش انتقال LCT خارجی (هنگامی که LU-205 یا LU-303 نصب شده باشد) ۱۷-۲۰ حسگر انتقال عمودی سینی ۲ (PS12) حتی پس از گذشت مدت زمان تعیین شده پس از روشن شدن حسگر تغذیه کاغذ LU (PS3) توسط یک کاغذ، روشن نمیشود. - اگر حسگر تغذیه کاغذ LU (PS3) هنگام روشن شدن کلید اصلی برق روشن شود، دری باز و بسته شود، یا تغذیه نادرست یا نقص تنظیم مجدد شود، منجر به گیر کردن کاغذ میشود.
******************************************************************************دلایل: • موتور انتقال LU (M3) • موتور انتقال عمودی سینی ۲ (M7) • حسگر تغذیه کاغذ LU (PS3) • حسگر انتقال عمودی سینی ۲ (PS12) • برد درایو LU (LUDB) • برد تغذیه/انتقال کاغذ (PFTDB)